Polythene material features
Polythene is a kind of thermoplastic resin with high crystallinity and non-polarity. The appearance of the original polyethylene is milky white, with a certain degree of translucent in the thin section. PE has excellent properties for most life and industrial chemicals. The polymer is not hygroscopic and has a good waterproof vapor, which can be used for packaging purposes. Polyethylene has good electrical properties, especially insulation dielectric strength, which makes it suitable for wire and cable.
Polythene extruder machine Introduction
The polythene extruder machine mainly use PVC/PP/PE and PA as the main raw material to produce single - wall corrugated pipe unit. The professional screw and mould design reduces the wear and ease of the screw. The tube is widely used in the conduit of wires and cables, the internal line protection pipes of cars or trains, and the washing machines for drainage pipes and farmland.
The application of polythene extruder machine for producing COD pipe
1. COD polythene extruder machine
3)3-9 inner ducts
2. COD pipe It uses friction coefficient extremely low modified HDPE is the primary data, in the structure take the friction coefficient extremely low long wall tube as the sub-tube, bears the high pressure, the easy curving corrugated pipe is the female tube, after compound squeezes out becomes. It bears the high pressure, but is curving, has the discriminati on, the easy construction is the main feature, in the physical property, the service life, aspects and so on project construction has the superiority.
Coiling Length of C.O.D.each reel may practically coiled up to 500 meters, however, coiling even 1,000 meters of small dimension model is also available.
3.flexible and lengthy product of COD, it enables quick installation reducing considerable consecutive work quantities such as trench excavation, inner duct insertion
The parameters of COD polythene extruder machine
Polythene extruder machine production product